[cfp-interest 3834] Re: Rounding terminology

[Jim Thomas]

I think these changes are ok, except for the one in 3.14, noted below.

- Jim Thomas

> On Mar 18, 2026, at 6:44 PM, Damian McGuckin <damianm at esi.com.au> wrote:
> 
> On Sat, 14 Mar 2026, Jim Thomas wrote:
> 
>> This approach does not entail a proposal for a global change to all rounding language in C2Y to conform to the preferred terminology.
> 
> A list of potential changes appears below. Needs thorough checking
> 
> All the occurrences in Annex F are done - Damian
> 
> Change
> 	current rounding mode -> applicable rounding direction mode

	-> rounding direction

Doesn’t necessarily involve a mode.

> in
> 	3.14#1
> 
> Change
> 	current rounding direction -> current dynamic rounding direction
> in
> 	7.6.6.4#3
Ok
> 
> Change
> 	current rounding mode -> applicable rounding direction mode
> in
> 	7.12.14.1#2
> 	7.12.15.2#2
> 	7.12.15.3#2
> 	7.12.15.4#2
> 	7.12.15.5#2
> 	7.12.15.6#2
> 	7.12.15.7#2
Ok

> 
> Change
> 	current rounding direction -> applicable rounding direction mode
> in
> 	7.12.10.3#2
> 	7.12.10.5#2
> 	7.12.14.1#2
Ok

> 	7.24.6.2#8
> 	7.24.6.2#12
> 	7.24.6.2#13
Ok

> 	7.25.2.6#9
> 	7.25.2.6#10*2
> 	7.33.2.2#8
> 	7.33.2.2#12
> 	7.33.2.2#13
> 	7.33.4.2.2#11
> 	7.33.4.2.2#12*2
Ok
> 
> Change
> 	current rounding direction -> rounding direction modes
> in
> 	7.12.10.6#2
> 	7.12.10.7#2
> 	7.12.10.8#2
Ok
> 
> _______________________________________________
> cfp-interest mailing list
> cfp-interest at oakapple.net
> http://mailman.oakapple.net/mailman/listinfo/cfp-interest